This is the original model version (v1.0) with default "standard run" parameter set: see detailed commentary  here  and  here . As of 2 September 2015, ongoing development has now shifted to  this version  of the model.   The significance of reduced energy return on energy invested (EROI) in the tr
This is the original model version (v1.0) with default "standard run" parameter set: see detailed commentary here and here. As of 2 September 2015, ongoing development has now shifted to this version of the model.

The significance of reduced energy return on energy invested (EROI) in the transition from fossil fuel to renewable primary energy sources is often disputed by both renewable energy proponents and mainstream economists.​ This model illustrates the impact of EROI in large-scale energy transition using a system dynamics approach. The variables of primary interest here are: 1) net energy available to "the rest of the economy" as renewable penetration increases [Total final energy services out to the economy]; and 2) the size of the energy sector as a proportion of overall economic activity, treating energy use as a very rough proxy for size [Energy services ratio].
This model aggregates energy supply in the form of fuels and electricity as a single variable, total final energy services, and treats the global economy as a single closed system.
The model includes all major incumbent energy sources, and assumes a transition to wind, PV, hydro and nuclear generated electricity, plus biomass electricity and fuels. Hydro, biomass and nuclear growth rates are built into the model from the outset, and wind and PV emplacement rates respond to the built-in retirement rates for fossil energy sources, by attempting to make up the difference between the historical maximum total energy services out to the global economy, and the current total energy services out. Intermittency of PV and wind are compensated via Li-ion battery storage. Note, however, that seasonal variation of PV is not fully addressed i.e. PV is modeled using annual and global average parameters. For this to have anything close to real world validity, this would require that all PV capacity is located in highly favourable locations in terms of annual average insolation, and that energy is distributed from these regions to points of end use. The necessary distribution infrastructure is not included in the model at this stage.
It is possible to explore the effect of seasonal variation with PV assumed to be distributed more widely by de-rating capacity factor and increasing the autonomy period for storage.

This version of the model takes values for emplaced capacities of conventional sources (i.e. all energy sources except wind and PV) as exogenous inputs, based on data generated from earlier endogenously-generated emplaced capacities (for which emplacement rates as a proportion of existing installed capacity were the primary exogenous input).
A detailed description of all model input parameters is available  here . These are discussed further  here  and  here .  Update 14 December 2015 (v2.5): correction to net output basis LCOE calculation, to include actual self power demand for wind, PV and batteries in place of "2015 reference" value
A detailed description of all model input parameters is available here. These are discussed further here and here.

Update 14 December 2015 (v2.5): correction to net output basis LCOE calculation, to include actual self power demand for wind, PV and batteries in place of "2015 reference" values.

Update 20 November 2015 (v2.4): levelised O&M costs now added for wind & PV, so that complete (less transmission-related investments) LCOE for wind and PV is calculated, for both gross and net output.

Update 18 November 2015 (v2.3: development of capital cost estimates for wind, PV and battery buffering, adding levelised capital cost per unit net output, for comparison with levelised capital cost per unit gross output. Levelised capital cost estimate has been substantially refined, bringing this into line with standard practice for capital recovery calculation. Discount rate is user adjustable.

Default maximum autonomy periods reduced to 48 hours for wind and 72 hours for PV.

Update 22 October 2015 (v2.2): added ramped introduction of wind and PV buffering capacity. Wind and PV buffering ramps from zero to the maximum autonomy period as wind and PV generated electricity increases as a proportion of overall electricity supply. The threshold proportion for maximum autonomy period is user adjustable. Ramping uses interpolation based on an elliptical curve between zero and the threshold proportion, to avoid discontinuities that produce poor response shape in key variables.

Update 23 September 2015 (v2.1): added capital investment calculation and associated LCOE contribution for wind generation plant, PV generation plant and storage batteries.

**This version (v2.0) includes refined energy conversion efficiency estimates, increasing the global mean efficiency, but also reducing the aggressiveness of the self-demand learning curves for all sources. The basis for the conversion efficiencies, including all assumptions relating to specific types of work & heat used by the economy, is provided in this Excel spreadsheet.

Conversion of self power demand to energy services demand for each source is carried out via a reference global mean conversion efficiency, set as a user input using the global mean conversion efficiency calculated in the model at the time of transition commencement (taken to be the time for which all EROI parameter values are defined. A learning curve is applied to this value to account for future improvement in self power demand to services conversion efficiency.**

The original "standard run" version of the model is available here.
Our group is taking into account the 4 top producers of Renewable Energy and going to predict the future growth of using energy and when our energy demand will be overtaken by our energy production.
Our group is taking into account the 4 top producers of Renewable Energy and going to predict the future growth of using energy and when our energy demand will be overtaken by our energy production.
A detailed description of all model input parameters is available  here . These are discussed further  here  and  here .   Update 6 August 2018 (v2.8): Updated historical wind and PV deployment
 data for 2016-2017, adding projected PV deployment for 2018. Data via 
https://en.wikipedia.org/wiki/Grow
A detailed description of all model input parameters is available here. These are discussed further here and here.

Update 6 August 2018 (v2.8): Updated historical wind and PV deployment data for 2016-2017, adding projected PV deployment for 2018. Data via https://en.wikipedia.org/wiki/Growth_of_photovoltaics and https://en.wikipedia.org/wiki/Wind_power_by_country.

Update 26 October 2017 (v2.7): Updated historical wind and PV deployment data for 2015-2016, adding projected PV deployment for 2017. Data via https://en.wikipedia.org/wiki/Growth_of_photovoltaics and https://en.wikipedia.org/wiki/Wind_power_by_country.

Update 18 December 2016 (v2.7): Added feature to calculate a global EROI index for all energy sources plus intermittency buffering (currently batteries only, but this could be diversified). The index is calculated specifically in terms of energy services in the form of work and heat. That is, it takes the aggregated energy services made available by all sources as the energy output term, and the energy services required to provided the buffered output as the energy input term.

Update 29 June 2016 (v2.6): Added historical emplacement for wind and PV capacity. The maximum historical emplacement rates are then maintained from year 114/115 until the end of the model period. This acts as a base emplacement rate that is then augmented with the contribution made via the feedback control mechanism. Note that battery buffering commences only once the additional emplacement via the feedback controller kicks in. This means that there is a base capacity for both wind and PV for which no buffering is provided, slightly reducing the energy services required for wind and PV supplies, as well as associated costs. Contributions from biomass and nuclear have also been increased slightly, in line with the earlier intention that these should approximately double during the transition period. This leads to a modest reduction in the contributions required from wind and PV.

Added calculation of global mean conversion efficiency energy to services on primary energy basis. This involves making an adjustment to the gross energy outputs for all thermal electricity generation sources. The reason for this is that standard EROI analysis methodology involves inclusion of energy inputs on a primary energy equivalent basis. In order to convert correctly between energy inputs and energy service inputs, the reference conversion efficiency must therefore be defined on a primary energy basis. Previously, this conversion was made on the basis of the mean conversion efficiency from final energy to energy services.

Update 14 December 2015 (v2.5): correction to net output basis LCOE calculation, to include actual self power demand for wind, PV and batteries in place of "2015 reference" values.

Update 20 November 2015 (v2.4): levelised O&M costs now added for wind & PV, so that complete (less transmission-related investments) LCOE for wind and PV is calculated, for both gross and net output.

Update 18 November 2015 (v2.3: development of capital cost estimates for wind, PV and battery buffering, adding levelised capital cost per unit net output, for comparison with levelised capital cost per unit gross output. Levelised capital cost estimate has been substantially refined, bringing this into line with standard practice for capital recovery calculation. Discount rate is user adjustable.

Default maximum autonomy periods reduced to 48 hours for wind and 72 hours for PV.

Update 22 October 2015 (v2.2): added ramped introduction of wind and PV buffering capacity. Wind and PV buffering ramps from zero to the maximum autonomy period as wind and PV generated electricity increases as a proportion of overall electricity supply. The threshold proportion for maximum autonomy period is user adjustable. Ramping uses interpolation based on an elliptical curve between zero and the threshold proportion, to avoid discontinuities that produce poor response shape in key variables.

Update 23 September 2015 (v2.1): added capital investment calculation and associated LCOE contribution for wind generation plant, PV generation plant and storage batteries.

**This version (v2.0) includes refined energy conversion efficiency estimates, increasing the global mean efficiency, but also reducing the aggressiveness of the self-demand learning curves for all sources. The basis for the conversion efficiencies, including all assumptions relating to specific types of work & heat used by the economy, is provided in this Excel spreadsheet.

Conversion of self power demand to energy services demand for each source is carried out via a reference global mean conversion efficiency, set as a user input using the global mean conversion efficiency calculated in the model at the time of transition commencement (taken to be the time for which all EROI parameter values are defined. A learning curve is applied to this value to account for future improvement in self power demand to services conversion efficiency.**

The original "standard run" version of the model is available here.
Basic Energy Renewable Model. Created on May 4 2019, based on interview with Jerico Bakhuis.    Model tries to simulate a system where we have a dynamic Energy Consumption load. The production of energy is supplied by solar energy and by wind energy.  If there is excess supply of energy (supply >
Basic Energy Renewable Model. Created on May 4 2019, based on interview with Jerico Bakhuis.

Model tries to simulate a system where we have a dynamic Energy Consumption load. The production of energy is supplied by solar energy and by wind energy.

If there is excess supply of energy (supply > demand) the battery is charged. If there is excess demand of energy (supply <demand) the battery is decharged.

The goals of the model are:
1)What combination of Wind production and Solare Energy production leads to a constant battery (not decreasing and not increasing?
2) How can this model be extended with production parameters (Wind mill blades and solar panel units)?
3. How can this model be extended for multiple households (more Energy consumption loads)?
4. How can this model be extended to receive actual data for a year (past data at monthly or hourly granularity)?
5. How can this model be extended to include predictions (future solar energy and wind energy production) based on weather data (expected wind curves and expected solar days at monthly, weekly and daily granularity)?
6. How can this model be extended to use other battery systems (like a water dam that stores water)?
7. How can this model be extended with the right units of measurements (Mwh, m/s, Kw, Mw etc) so it resembles the reality of a small island nation?
8. How can this model be extended with nice images (wind mill, solar panel etc. ) on top of the calculations, so that the story can be told to non technical people?
9. How can we use this tool to tell the story, bit by bit, as an unfolding story to explain the variables, the relationships to people?

Our goal is to improve the model so that it gets actual data feeds (Energy consumption loads of residential units and businesses) and actual data feeds for other parameters (like expected sunny days and expected wind curves) so that it simulates the renewable energy situation on a small island economy in the Caribbean.

Copyrights. This model is provided as is. You are allowed to copy it and use it and improve it. As long as you publish the model on Insightmaker and you keep the name the same +<your improvements>. You need to add a text in the model explaining your improvements and where you changed the model. So that others can benefit from it. Also you need to provide credits to the original model by stating (this model is an improvement of the Basic Renewable Energy Model, created by Runy Calmera and Jerico Bakhuis on 4 May 2019 and provide a link to our model. 

You need to include this description and credits in the description of your model. 

Contact Runy Calmera, runy@calmera.nl, www.calmera.nl, tel +59996678932 for more research on this energy model. 
Used as introduction to systems ideas. Contrast two representations of the  structure  of a deep fryer:  (1) A static engineering image or (2) a dynamic systems representation that includes in-flow and out-flow of energy, feedback, and the ability to simulate the over-time behavior of the fryer, inc
Used as introduction to systems ideas. Contrast two representations of the structure of a deep fryer:  (1) A static engineering image or (2) a dynamic systems representation that includes in-flow and out-flow of energy, feedback, and the ability to simulate the over-time behavior of the fryer, including when food is added.
  Colombia has the opportunity to implement the Autoswitch, but there are no guarantees of its impact on the market, given its complexity. This model implements two policies: Pressure Control through Demand Response - RD and Autoswitch.
Colombia has the opportunity to implement the Autoswitch, but there are no guarantees of its impact on the market, given its complexity. This model implements two policies: Pressure Control through Demand Response - RD and Autoswitch.
Describes the flow of money through the consultation program
Describes the flow of money through the consultation program
2 Box model for earth energy systems
2 Box model for earth energy systems
A detailed description of all model input parameters is available  here . These are discussed further  here  and  here .  Update 14 December 2015 (v2.5): correction to net output basis LCOE calculation, to include actual self power demand for wind, PV and batteries in place of "2015 reference" value
A detailed description of all model input parameters is available here. These are discussed further here and here.

Update 14 December 2015 (v2.5): correction to net output basis LCOE calculation, to include actual self power demand for wind, PV and batteries in place of "2015 reference" values.

Update 20 November 2015 (v2.4): levelised O&M costs now added for wind & PV, so that complete (less transmission-related investments) LCOE for wind and PV is calculated, for both gross and net output.

Update 18 November 2015 (v2.3: development of capital cost estimates for wind, PV and battery buffering, adding levelised capital cost per unit net output, for comparison with levelised capital cost per unit gross output. Levelised capital cost estimate has been substantially refined, bringing this into line with standard practice for capital recovery calculation. Discount rate is user adjustable.

Default maximum autonomy periods reduced to 48 hours for wind and 72 hours for PV.

Update 22 October 2015 (v2.2): added ramped introduction of wind and PV buffering capacity. Wind and PV buffering ramps from zero to the maximum autonomy period as wind and PV generated electricity increases as a proportion of overall electricity supply. The threshold proportion for maximum autonomy period is user adjustable. Ramping uses interpolation based on an elliptical curve between zero and the threshold proportion, to avoid discontinuities that produce poor response shape in key variables.

Update 23 September 2015 (v2.1): added capital investment calculation and associated LCOE contribution for wind generation plant, PV generation plant and storage batteries.

**This version (v2.0) includes refined energy conversion efficiency estimates, increasing the global mean efficiency, but also reducing the aggressiveness of the self-demand learning curves for all sources. The basis for the conversion efficiencies, including all assumptions relating to specific types of work & heat used by the economy, is provided in this Excel spreadsheet.

Conversion of self power demand to energy services demand for each source is carried out via a reference global mean conversion efficiency, set as a user input using the global mean conversion efficiency calculated in the model at the time of transition commencement (taken to be the time for which all EROI parameter values are defined. A learning curve is applied to this value to account for future improvement in self power demand to services conversion efficiency.**

The original "standard run" version of the model is available here.
4 months ago
This is step 5 in making a climate model based on our insights of how trees actively contribute to the cooling capcacity of the Earth.​  In this step we added the reflection of sun energy by Clouds    Present the temperature of the Earth is 288 Kelvin. Without Earth would be 255 Kelvin. So the energ
This is step 5 in making a climate model based on our insights of how trees actively contribute to the cooling capcacity of the Earth.​

In this step we added the reflection of sun energy by Clouds 

Present the temperature of the Earth is 288 Kelvin. Without Earth would be 255 Kelvin. So the energy balance of the Earth add 33 Kelvin.

We optimize the variable GHG-effect and the optimal number is 0.29625 in this model.


With Our-Green-Spine we have discovered new insights how trees / forest / green structures are part of the managing system of controlling the temperature of our Earth via their cooling capacity by using water and influencing the water cycle. We want to translate our insights in a climate model. People who to join us please send an email to marcel.planb@gmail.com.
Thanks, Marcel de Berg
This simulation examines the caloric well of the world. World population is estimated to start at about 7.7 billion. Per capita estimates are from the International Energy Agency (IEA).
This simulation examines the caloric well of the world. World population is estimated to start at about 7.7 billion. Per capita estimates are from the International Energy Agency (IEA).
  Colombia has the opportunity to implement the Autoswitch, but there are no guarantees of its impact on the market, given its complexity. This model implements two policies: Pressure Control through Demand Response - RD and Autoswitch.
Colombia has the opportunity to implement the Autoswitch, but there are no guarantees of its impact on the market, given its complexity. This model implements two policies: Pressure Control through Demand Response - RD and Autoswitch.