BMA708 | Insight Maker

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

Mika yang

Introduction

This model simulates the COVID-19 outbreaks in Burnie, the government reactions, as well as the economic impact. The government's strategy is based on the number of COVID-19 cases reported and testing rates and recovered.

Assumptions

In the same trend that government policy decreases infection, it also reduces economic growth.

When there are ten or fewer COVID-19 cases reported, government policy is triggered.

The economy suffers as a result of an increase in COVID-19 cases.

Interesting insights

The higher testing rates appear to result in a more quick government response, resulting in fewer infectious cases. However, it has a negative influence on the economy.

Model of COVID-19 outbreak in Burnie Tasmania - Xiaoqing Ren 525418

Xiaoqing Ren

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

Sike Liu

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

Lin Ling

Overview:

The model shows the industry competition and relationship between Forrestry and Mountain Bike Trip in Derby, Tasmania. The aim of the simulation is to find a balance between the co-existence of these two industry.

How Does the Model Work?

Both industries will generate incomes. Firstly, income is generated from the sale of timber through logging. In addition, income is also generated from the consumption of mountain bike riders. Regarding to the Forrestry industry, people cut down trees because there is a market demand for timber. The timber is sold for profits. However, the experience of mountain biking tourism is largely affected by the low regeneration rate of trees and the degradation of the environment and landscape due to tree felling. People have better riding experiences when trees are abundant and the scenery is beautiful. People's satisfaction and expectations depend on the scenery and experience. Recommendations of past riders will also impact the tourists amount.

Interesting Insights

The income generated by logging can provide a significant economic contribution to Tasmania, but excessive logging can lead to environmental problems and a reduction in visitors. Excessive logging can lead to a decline in tourism in the mountains, which will affect tourism. Despite the importance of forestry, tourism can also provide a significant economic contribution to Tasmania. The government should find a balance between the two industries while maintaining the number of tourists.

Simulation of Derby Mountain bikes versus logging

nicole

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

ching tung li

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

Lin Ling

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

张青

Explanation:

Explanation:

This model presents the COVID-19 outbreak in Burnie and how the government reacts to it. Moreover, the model also illustrates how the economy in Burnie is impacted by the pandemic. The possible stages of residents when the infectious disease spreads in Burnie can be concluded as Susceptible, Infection and Recovery, which are used as the main data in this model. However, the improvement of decreasing of reported infection rates of this infectious disease and increasing of recovery rates are contributed by the implementation of the Government Health Policy.

Assumption

The decrease of both infection rate and economic growth are all influenced by the Government Health Policy simultaneously. The Government Health Policy is only triggered when there are 10 cases reported. However, the increase in reporting COVID-19 cases affects economic growth negatively.

Interesting Insights:

There are two interesting insights that have been revealed from the simulation. First, the death rate continuously increased even though the infection rate goes down. However, the increase in testing rates contributed to the stability of the death rate towards the end of the week. Moreover, higher testing rates also trigger faster government intervention, which can reduce infectious cases. Second, as the Government Health Policy limited the chance of going out and shopping, the economic growth is negative due to the higher cases.

BMA708, Assessment 3: Complex system, Burnie Covid-19 outbreak

Hanyong Li

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

Zilin Huang

Simple epidemiological model for Burnie, Tasmania

SIR: Susceptible to infection - Infected - Recovery, Government responses and Economic impacts

Government policy is activated when there are 10 or fewer reported cases of COVID-19. The more people tested, the fewer people became infected. So the government's policy is to reduce infections by increasing the number of people tested and starting early. At the same time, it has slowed the economic growth (which, according to the model, will stop for next 52 weeks).

Clone of Model of Covid-19 Outbreak in Burnie, Tasmania (Yue Xiang 512994)

Xuexiao Zhang

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

Mika yang

A model situmalte the relationship between moutain bikes and logging industry in Derby, Tasmania, It explains more when the number of visitors increases or decreses.

How the model works

The left side shows when the number of travellers increase, the income from travellers rental of bike and stay of hotel increase simultaneously. However, there is a capacity for both parking lots and hotel venues, which means that the top ability of hospitality of Derby. The right side shows the logging industry of Derby and income from logging. It has a impact on how travellers would value Derby moutain.

Insights

As the number of travellers increase, it increases the total income of Derby, and in return, the local government will re-revest in Derby Moutain and will also maintain the forrestry logging industry.

Simulation of Derby Moutain Bikes Versus Biking

Zhaofeng Liu

This model indicate indicates the modeling COVID-19 outbreaks and responses from government policies with the effect on the local economy. Model was occurred at Burnie, Tasmania. The model mainly contains three parts: COVID-19 pandemic outbreak, four differences government policies and what the impact on economy from those policies.

Assumptions:

(1) Various variables influence the model, which can result in varied outcomes. The following values are based on an estimate and may differ from actual values. Government initiatives are focused at reducing Covid-19 infections and, as a result, affecting (both positive and negative) economic growth.

(2) 42% of infected people will recovery. 10% of people who are infected will die and the rate relatively higher due to the much old people living in Burnie, Tasmania.

78% of cases get tested.

(3) Government policy will only be implemented when there are ten or more recorded cases. Four government policies have had influences on infection.

(4) The rising number of instances will have a negative impact on Burnie's economic growth.

Insights:

1. As a result of the government's covid 19 rules, fewer people will be vulnerable. Less people going to be susceptible.

2. After the government policy intervention, there is a effectively reduce of infected people.

3. Overall, there is no big differences of economic performance from the graph, might due to the positive and negative effect of economy. And after two weeks, the economy maintained a level of development without much decline.

BMA708 Yanglin Hu

Yanglin Hu

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

Lin Ling

in class model about balanced loops in production

Balanced loop model. production model in class

BS

This is a model that simulates the competition between logging versus adventure tourism (mountain bike riding) in Derby Tasmania. The simulation is borrowed from the Easter island simulation

Simulation of Derby Mountain bikes versus logging

Debrina Setiawan

Overview

A model which simulates the competition between logging versus adventure tourism (mountain bike ridding) in Derby Tasmania. Simulation borrowed from the Easter Island simulation.

How the model works.

Trees grow, we cut them down because of demand for Timber amd sell the logs.

With mountain bkie visits. This depends on past experience and recommendations. Past experience and recommendations depends on Scenery number of trees compared to visitor and Adventure number of trees and users. Park capacity limits the number of users.

Interesting insights

It seems that high logging does not deter mountain biking. By reducing park capacity, visitor experience and numbers are improved. A major problem is that any success with the mountain bike park leads to an explosion in visitor numbers. Also a high price of timber is needed to balance popularity of the park. It seems also that only a narrow corridor is needed for mountain biking

Clone of Simulation of Derby Mountain biking versus logging

Steven D'Alessandro

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

Wenyu Liao

This model shows the COVID-19 outbreaks in Burnie and the Government intervention to alleviate the crisis and also how is the intervention affect the economy.

It is assumed that the Government intervention is triggered when the COVID-19 case is equal to or more than 10.

Government intervention - lock down the state, suppress the development of COVID-19 effectively. It is related to most of people stay at home to reduce the exposure in public area.

On the other hand, it also bring the economy of Burnie in the recession, as no tourists, no dining out activities and decrease in money spending in the city.

Burnie COVID-19 outbreaks and economic impacts_Pui Chu Daisy Cheung 524767

Pui Chu Daisy Cheung

7

A sample model for class discussion modeling COVID-19 outbreaks and responses from government with the effect on the local economy. Govt policy is dependent on reported COVID-19 cases, which in turn depend on testing rates less those who recover

Assumptions

Govt policy reduces infection and economic growth in the same way.

Govt policy is trigger when reported COVID-19 case are 10 or less.

A greater number of COVID-19 cases has a negative effect on the economy. This is due to economic signalling that all is not well.

Interesting insights

Higher testing rates seem to trigger more rapid government intervention, which reduces infectious cases. The impact on the economy though of higher detected cases though is negative.

Clone of Burnie COVID-19 outbreak demo model version 2

lala Molawa

Overview
This model is a working simulation of the competition between the mountain biking tourism industry versus the forestry logging within Derby Tasmania.

How the model works

The left side of the model highlights the mountain bike flow beginning with demand for the forest that leads to increased visitors using the forest of mountain biking. Accompanying variables effect the tourism income that flows from use of the bike trails.
On the right side, the forest flow begins with tree growth then a demand for timber leading to the logging production. The sales from the logging then lead to the forestry income.
The model works by identifying how the different variables interact with both mountain biking and logging. As illustrated there are variables that have a shared effect such as scenery and adventure and entertainment.

Variables
The variables are essential in understanding what drives the flow within the model. For example mountain biking demand is dependent on positive word mouth which in turn is dependent on scenery. This is an important factor as logging has a negative impact on how the scenery changes as logging deteriorates the landscape and therefore effects positive word of mouth.
By establishing variables and their relationships with each other, the model highlights exactly how mountain biking and forestry logging effect each other and the income it supports.

Interesting Insights
The model suggests that though there is some impact from logging, tourism still prospers in spite of negative impacts to the scenery with tourism increasing substantially over forestry income. There is also a point at which the visitor population increases exponentially at which most other variables including adventure and entertainment also increase in result. The model suggests that it may be possible for logging and mountain biking to happen simultaneously without negatively impacting on the tourism income.

Remake of Simulation of Derby Mountain biking versus logging

Fons Wijnhoven

10 months ago

blah blah

Balanced loop model

Chris Rawson

Overview

This model not only reveals the conflict between proposed logging of adjacent coups and Mountain bike in Derby but also simulates competition between them. The simulation model aims to investigate the potential coexistence opportunities between the mountain biking and forestry and find out the optimal point for coexistence to help improve Tasmania’s economy.

How the model works

It is recognized that the mountain biking and forestry industries can help support the Tasmanian community and strengthen the Tasmanian economy. The logging and forest sector in Derby can help the local community generate wealth and create more employment opportunities. The sector main source of income come from selling timber such as domestic and export sales. Nevertheless, the sector’s profit has decreased over the past few years on account of the weaker demand and reduced output. Accordingly, the profitability and output of the sector have fluctuated in response to the availability of timber, the timber price movements as well as the impact of changing demand conditions in downstream timber processing sectors. The slow growth rate for a timber has a negative impact on the profitability of the forestry industry and the economic contribution of this industry is set to grow slower, as there is a positive correlation between these variables. In addition, the mountain biking industry in Derby can bring a huge significant economic contribution to the local community. The revenue streams of the industry come from bike rental, accommodation, retail purchase and meals and beverages. These variables also influence the past experience which is positive correlation between reviews and satisfaction that can impact the demand for the mountain biking trails. More importantly, the low regeneration rate for a timber can have a negative impact on the landscape of the mountain biking and the tourist’s past experience that led to a decrease in the demand of tourists for the mountain biking, as the reviews and satisfaction are dependent on the landscape and past experience. It is evident that the industry not only helps the local community generate wealth through industry value addition but also creates a lot of employment opportunities. Therefore, the Mountain Bike Trails can be regarded as sustainable tourism that can help increase employment opportunities and economic contribution that can be of main economic significance to the Tasmania’s economy. Therefore, both industries can co-exist that can maximise the economic contribution to the local community and the Tasmanian economy.

Interesting Insights

It is interesting to note that the activity of cutting down trees does not influence the development of Mountain Biking industry. By lowering the prices of accommodation, food, bike rental and souvenirs, it can help increase the reviews and recommendations of Mountain Biking that will enhance the number of tourists. In this case, the Mountain Biking industry can achieve sustainable economic growth in the long-term while the economic growth rate of forestry industry will continue to decrease.

Simulation of Derby Mountain bikes versus logging

Charles Lau

BMA708 Models